Cadsoft EAGLE - это комплексное средство для разработки печатных плат, начиная с создания принципиальной электрической схемы и заканчивая созданием печатной платы и её трассировкой. Pro-версия позволяет разрабатывать печатные платы размером до 1600x1600 мм (16 слоёв) с разрешением до 1/10000 мм. Для этого в программе реализованы три модуля: Schematic Module, Layout Editor, Autorouter. Кроме этого программа имеет довольно большую библиотеку, содержащую множество стандартных и достаточно распространённых электронных компонентов, например микроконтроллеры, таким образом, не нужно будет самому рисовать изображение компонента на схеме и создавать футпринт для печатной платы. Большинство компонентов также имеют краткое описание.
Программа включает в себя графический редактор схем (Schematic Editor), редактор печатных плат (Layout Editor), весьма гибкий и удобный редактор библиотек (Library Editor) и автотрассировщик (Autorouter). В стандартный комплект поставки входят также модули, проверяющие правильность подключения электрических цепей (ERC – Electrical Rule Check) и правильность расположения компонентов на плате (DRC – Design Rule Check). Причём две последних операции выглядят намного приятнее, чем в более продвинутых системах. EAGLE проверяет правильность дизайна и соединений так, что пользователь вообще не знает, что этим занимается какая-то посторонняя утилита. Следует отметить, что пользователю не приходится запускать для этого различные программные модули, как это сделано в P-CAD или ACCEL EDA - все переходы осуществляются внутри самой программы. Имеется также возможность заливки заданного пространства полигонами. EAGLE позволяет проектировать многослойные платы, содержащие до 16 слоёв и имеющие размеры 1626х1626 мм при разрешающей способности 0,0001 мм. Систему единиц (дюймовую или метрическую) можно изменить на любой фазе работы с проектом без каких-либо потерь.
Одним из основных достоинств данного пакета профессионалы выделяют полную синхронность изменений в проекте. К примеру, если вы изменили или удалили какой-либо компонент на схеме, это тут же отразится на рисунке платы. В таких программах, как ACCEL EDA, P-CAD и OrCAD необходимо постоянно контролировать весь проект, при малейших изменениях и на любом этапе работы. Кроме того, в EAGLE откат событий (UNDO) возможен на любое количество действий (такое не позволяет делать даже самый мощный на сегодняшний день CAD – ACCEL EDA).
Программа включает в себя:
• Schematic Module - модуль для создания принципиальных схем. Имеет удобный интерфейс, сетку для выравнивания компонентов и электрических линий, элементы для рисования на листе.
• Layout Editor - редактор печатных плат. Позволяет размещать компоненты на будущей ПП, имеется проверка на наличие ошибок, вспомогательные линии для упрощения процесса ручной трассировки, средства для нанесения шелкографической маркировки на ПП.
• Autorouter - модуль для автоматической трассировки печатных плат. Большое количество настроек позволяет повысить качество автотрассировки.
• Library Editor - весьма гибкий и удобный редактор библиотек.
Release notes for EAGLE 7.2.0
MODULE command:
• Extended command syntax to prefix definition with 'prefix*'.
• Added input line for prefix in module creation dialog.
Ports:
• Changed interactive behavior of the PORT command (now more like PIN, see help for details).
• Allow renaming a port in the properties dialog.
• Increased distance of port name to module frame.
• Improved explanation for selection and movement in PORT command help.
• Added available busses to the command's selection list.
• Proper highlighting of a selected port and the display of its info string.
• Right mouse button now ignored; port rotation is chosen automatically.
• General support of autoconnection of ports to nets resp. busses when moving module instances or placing copied module instances.
• Avoiding placement of port on port.
User Language:
• Added new members module, modulepart and modulepath to UL_PART for better support of parts in hierarchical schematics.
• New object type UL_ERROR in order to access ERC and DRC errors.
• Added a statement and test function to directly access a module (e.g. if (module) module(M) { ... }).
Miscellaneous:
• Support of userdefined context menu entries for module instances.
• Added translation of the GUI to Russian (help and manual are not included).
• Added an entry 'Open in Library' to package and device context menus in Control Panel.
• Implemented eaglerc switch Warning.Cam.DrillsAndHolesConcurrent to allow (withvalue '0') skipping the CAM Processor warning about concurrent output of drills and holes.
• The SET command can now configure the popup menus for values of Dline_* by setting the Dline_Width_Menu, Dline_Ext_Width_Menu, Dline_Ext_Length_Menu and Dline_Ext_Offset_Menu arrays.
• Properties dialog for module instances: The combobox for offset is only shown for module instances where offset is supported (on schematic main level) and only the (still) available values are offered.
• COPY, PASTE, Import of schematic drawing (PASTE from file): If a net from a bus is copied together with its bus, the copied net segments keep their name in order to match to the bus.
• Import of schematic drawing (PASTE from file): Names of implicitely created signals with unconnected power pin(s) are not changed in order to avoid an inconsistency.
• Import of schematic drawing (PASTE from file): In the net renaming dialog nets from a bus or with implicit power pin(s) are no longer changeable and indicated with icons and tooltip.
• Added ERC warnings for nets/busses which are overlapping with ports.
• Adjustment of file eagle.def for CAM format definition: increased standard resolution for Gerber and Excellon of 2.5 inch. The previous resolution of 2.4 inch is still available under GERBER_RS274X_24 and EXCELLON_24. Support for 2.6 inch as well with formats GERBER_RS274X_26 and EXCELLON_26.
• The new CadSoft EAGLE icon is now used for all cases (classic and new style).
• The assembly variant dialog has been taken out from the board editor to avoid misunderstandings. The variant combobox is only changeable in main schematic.
• In order to avoid confusing object names in hierarchical designs, offsets for module instances have been restricted to be unique within whole schematic.
Bugfixes:
• Added the new V7 EAGLE icon (resolution 48x48).
• Fix for loss of attributes of devicesets without package after switching between devicesets in library editor.
• Avoiding corrupt device if created by drag&drop of another package from Control Panel to a deviceset in library editor if the package variant is named with '' (empty name).
• Fix for proper support of drag&drop of a package from Control Panel to a deviceset in library editor on Linux and MAC.
• Attributes of devicesets without package are no longer getting lost if a package variant is created.
• Made eaglecon.exe for CAM batch processing work again.
• Support of renaming of polygons from/to hierarchical names with NAME command.
• Netclass dialog: fix for default dialog sizes in extended/unextended state.
• Fix for name generation in VIA command to avoid names already used in schematic for nets without signal counterpart.
• Fix for handling of a group after setting it with setgroup() in a ULP. (E.g. moving signals or nets of the group didn't work.)
• Ensuring that radius of a circle does not exceed its limit.
• Correct handling of single quotes if doubled in 'SET CONTEXT' commands.
• Speeded up RATSNEST for boards containing many contactrefs with route value 'any'.
• Re-added missing direction of pins in the parameter toolbar.
• Fixed handling placeholder text '>GATE' in device context as in EAGLE versions prior to V6.
• Made change of netclass for a group selection of nets work again.
• The 'General' parameter tab was added again to the dialog for the Follow-me router.
• Ensuring that always at least one technology exists for a device in the device editor.
• Fixed highlighting of ports connected to the SHOWn bus.
• Avoiding junctions on ports with busses.
• Fix for crash on Windows when restarting PRINT command after deinstallation of a printer previously used.
• Avoiding autoconnecting incompatible ports to busses or nets if moving module instances.
• COPY/PASTE from package editor to board editor or from symbol editor to schematic editor: avoiding creation of illegal wires or polygons in signal, net or bus layer.
• Fixed possible inconsistency after renaming of nets connected to a port.
• Fix for display of HTML descriptions of device and package in Control Panel.
• Restriction of CHANGE PACKAGE/TECHNOLOGY in the board to non hierarchical elements (same like VALUE).
• Autorouter: fix of possible crash in Routing Variants Dialog when deleting variants.
• Update of V5 drawings: replacement of invalid character 'no break space' in gate, pin and other names.
• Fix for proper takeover of netclasses if pasting from a module.
• Avoiding removal of a netclass which is only used in a module.
• Import of hierarchical schematic drawing (PASTE from file): fix for possible erroneous duplication of identical modules.
• Avoiding of inconsistency after deleting bus type ports which are connected.
• EXPORT image monochrome: holes (from pads, vias and hole objects) are kept free from copper.
• Installation on MAC: avoiding unintended deinstallation of a previously installed version of EAGLE.
• Avoiding a possible inconsistency with net classes if connecting a port with a net which has no corresponding signal in the board yet.
• Avoiding a possible inconsistency after renaming the currently selected assembly variant.
• Fix of a potential crash during an active SHOW in a consistent schematic and board after loading a different board or schematic.
• Fixed handling of dynamically generated net wires if modifying modules by editing the module instances with drag&drop.
• Fix to avoid creation of module instances with offset notation referring to the same module and using the same offset.
• Fixed a possible crash if adding a bus connection to a port.
• Fix of a possible inconsistency after changing module instance offsets if several modules are used.
• Fix for unintended ripup of the corresponding signal if connecting segments of the same net.
Год выпуска : 2014
Лекарство : в комплекте (crack)
Операционная система : Windows® XP|Vista|7 & 8
Язык интерфейса : МL|English
Размер : 61.8 Mb
Для просмотра скрытого текста необходимо зарегистрироваться или войти на сайт.